| Frenzee
Kit |
 |
 Frenzee
Flying Wing Kit includes the following:
1 set of CNC cut EPP foam wing cores
1 set of elevons
2 pre-cut wing tips
1 1/64 in. plywood bottom plate
1 set of Dubro micro control horns
1 set of pushrods
1 set of hook and loop Velcro
2 zip ties
1 popsicle stick
1 piece of sandpaper (for elevons)
1 roll of colored covering tape
1 roll of strapping tape
1 set of directions
|
|
Brushless Power System:
1 CD Rom 3000kv 24gm motor
1 Slofly aluminum tube motor mount, 3/8 in.
1 APC 4.1x4.1 Prop
1 Wobbly Prop Adapter
1 Pre-cut motor mount |
Stock Power System:
1 Johnson 250 motor
1 Capacitor
2 4x4 Props
2 Rubber Prop Adapters
1 Pre-cut motor mount
|
Additional Items Required:
5-minute epoxy glue
Medium CA glue
Adhesive spray ( 3M 77 recommended)
Modeling knife
Hot glue (optional)
Needle-nose pliers
Radio control equipment |
- 1 3-channel transmitter with mixer
- 1 Receiver
- 2 Servos (50-55)
- Electronic Speed Control (ESC)
- 18 amp. recommended for the Brushless power system
- 10 amp. recommended for the Stock brushed power system
- Battery Pack
- 3-cell, 800-1000mAh Lithium Polymer is recommended for
the Brushless power system, giving 15 - 25 minutes of flight
- 2-cell, 700-1200mAh Lithium Polymer is recommended for
the Stock brushed power system, giving 15 - 25 minutes of
flight
|
