Sylvan Aircraft

Prodigy

The NEW Prodigy Flying Wing with stock Speed 400 Motor
(Also available in motorless version - See Order Page for Details)

2 - CNC cut EPP wing cores
4 - 1/4th inch carbon fiber spars
2 - Pre-cut balsa elevons
2 - DuBro Nylon control horns
2 - PRE-CUT Coroplast wing tips
2 - Threaded control rods with metal clevises
1 - Pre-cut 5-ply motor mount plate
1 - Pre-cut motor mount
1 - 1/64th inch thick birch plywood bottom plate
1 - Roll of 2 inch Strapping Tape
1 - Roll of 2 inch colored covering tape
2 - Zip Ties
1 - Popsicle Stick
1 - Set of Velcro Strips
1 - Piece of Small sandpaper
1 - Set of Directions

Brushed Power System:
1 - Speed 400 6v Reverse-Timed motor
1 - APC 5 x 5 prop
1 - Aluminum prop adapter - 2.3 mm

Additional Items required:
5-minute epoxy glue
Medium CA glue
Modeling knife
Hot glue (optional)
Needle-nose pliers
Radio control equipment

1 3-channel Transmitter, with mixer
2 Micro/Mini Servos
1 Micro/Mini Receiver
1 20 amp Electronic Speed Control
Battery Pack
- 8-cell 900mah NiMH
- 2-cell 1700mah LiPo (longer flight times + better performance)